Philips Saeco ESPRESSO SG200E - Manual (Page 6)

6
English
• However, the Saeco International Group,
whenever necessary and for valid reasons is
entitled to update existing manuals and send
to his customers all updating sheets that have
to be kept with the original manual. Any
technical problems that may arise can easily
be solved by consulting this manual. For
further information, contact the dealer where
the machine was purchased, or one of the
authorized service centres.
When calling, please, provide the following
information:
- the data written on the data plate located on
the rear side of the vending machine (fig. 1)
- The program version in the microprocessor
(see adhesive label on the component
mounted on the CPU card) (ref.’1’, fig. 2).
- The card code and version, to be found on
the component side of the CPU card (ref.’2’,
fig. 2).
Warning
It is absolutely forbidden to tamper with or modify
the data plate.
The Saeco International Group declines all
responsibility for injuries to people or damage to
things resulting from:
- incorrect installation
- inappropriate electrical and/or water
connection
- inadequate cleaning and maintenance
- unauthorized modification
- improper use of the vending machine
- non-original spare parts
• The Saeco International Group will not be
obliged in any case to indemnify any damage
caused as a result of the forced inactivity of
the machine due to failure.
• Installation and maintenance must be only
carried out by qualified technicians.
• Use only specific foodstuffs suitable for
vending machines.
• The automatic vending machine is not
suitable for outside installation. The machine
must be installed in dry places, with
temperatures not below 1°C and it must not
be installed in places where cleaning is made
with water hoses (e.g. large kitchens, etc.).
• If at the time of installation, the usage
conditions are different from those
established or are subject to change over
time, please contact the manufacturer
immediately before using the machine.
Furthermore, always act in compliance with
national or local standards.
fig. 1
fig. 2
Data Plate
”1”