Philips Saeco ESPRESSO SG200E - Manual (Page 40)

40
English
Beverage
with cup
Beverage
without cup
Beverage
Price
Level 1
Level 2
Cup
Price
Level 1
Level 2
Final
Cost
0.55
0.50
Counters
increased
Beverage
counter and
cup counter
Beverage
counter
8.3 Maintenance menu
8.3.1 Accessing the maintenance
menu
Open the door, insert the key into the safety
switch (fig. 18) and press key P2, located on the
CPU card (fig. 40, ref. 2) so as to enter the
maintenance menu.
Press P2 again, remove the key from the safety
switch and close the VM and wait for the self-
configuration process to end.
PRICE MANAGEMENT
The items of the PRICE MANAGEMENT are:
- Price table
99 price levels can be set.
- Beverage prices
It allows to combine each beverage with one of
the price levels set in the PRICE TABLE.
The combination can be:
- GLOBAL (all beverages are given the same
price level);
- SINGLE (each beverage will be given a
special price level).
- Global setting
By pressing the UP and DOWN keys and
confirming with ENTER, it allows you to choose
the price level to be combined with all beverages.
- Individual setting
It allows you to choose the price level for each
beverage.
Select the beverage using the UP and DOWN
keys and confirm with ENTER, then select the
price level - from 001 to 099 - with UP and DOWN
and confirm again with ENTER.
- Cup Price (displayed only if the Cup key is
set in PRESELECTION mode)
It allows you to assign a price to the cup if cup
preselection is activated.
The VMC will calculate the cost of the product
based on two components:
- a beverage
- a cup
therefore the operator will have to set the price
of both components. The amount paid by the
user for each product is the sum of the beverage
price plus the cup price.
Here is a practical example.
If:
price level 1 = 0.50
price level 2 = 0.05