Scalance x206-1 tp ports – Siemens SCALANCE X-200 User Manual
Page 41
Product Characteristics
4.4 SCALANCE X206-1
Figure 4-10 SCALANCE X206-1
4.4.4
SCALANCE X206-1 TP Ports
Connector Pinout
On the SCALANCE X206-1, the TP ports are implemented as RJ-45 sockets with MDI-X
assignment (Medium Dependent Interface–Autocrossover) of a network component.
Notice
TP cords or TP-XP cords with a maximum length of 10 m can be connected to the RJ-45 TP
port.
With the IE FC cables and IE FC RJ-45 plug 180, an overall cable length of a maximum of
100 m is permitted between two devices.
Autonegotiation
Autonegotiation means the automatic detection of the functionality of the port at the opposite
end. Using autonegotiation, repeaters or DTEs can detect the functionality available at the
port of a partner device allowing automatic configuration of different types of device. With
Industrial Ethernet SCALANCE X-100 and SCALANCE X-200 Product Line
Commissioning Manual, 1,
4-27