Savin 1232 - Manual (Page 26)

Preparations for Use as a Network Scanner
22
2
❖ ❖ ❖ ❖ Scan Size
Select the size of the original to be
scanned.
• When [Auto Detect] is selected,
the auto detect function of the
machine is used to set the origi-
nal size.
• When the size is specified, scan-
ning is performed for that size,
regardless of the actual size of
the original. The following size
can be selected.
A3
S,A4R,A4S,A5R,A5S,
11x17
S,8 1 /
2
x14
S,8 1 /
2
x13
S,
8 1 /
2
x11
R,8 1 /
2
x11
S,5 1 /
2
x8 1 /
2
R,5 1 /
2
x8 1 /
2
S,B4 JISS,B5
JIS
S,B5 JISR,Custom Size
Note
❒ When [Custom Size] is select-
ed, the dimensions of the
scan area (width and height)
can be specified.
Setting Procedure
AAAA
Press the
{{{{User Tools/Counter}}}} key.
The User Tools/Counter/Inquiry
screen is displayed.
BBBB
Press [Scanner Features].
The Scanner Features screen ap-
pears.
CCCC
Verify that the [Basic Settings] tab
is shown.
DDDD
Verify that [Program/Change] is se-
lected, and then select the scan
setting you want to program.
The screen for entering a scan set-
ting name is displayed.
EEEE
Enter the desired name and press
[OK]
.
Reference
For information about character
enter, see the General Settings
Guide.
The screen for the basic settings is
displayed. ZGJS002N