Smart Technologies SMART Audio 340 - Manual (Page 38)

Opening a configuration file
You can open a configuration file with SMART Audio configuration software, and then upload it to a
connected control unit. This could be part of implementing settings or restoring a backup of settings.
g To open a configuration file
1. Select Start > All Programs > SMART Technologies > SMART Tools.
2. Click Audio Configuration Software.
The SMART Audio Configuration Software screen appears.
I M P O R T A N T
If the Windows operating system does not see a SMART device, a warning appears.
Connect your computer to a SMART Audio system control unit with a USB cable.
3. Select File > Open.
4. Browse to and select the LPT file.
SMART Audio configuration software settings are loaded from the file.
Downloading a configuration file
You can download the configuration file from the control unit to your Windows computer to do one of
the following:
l
Configure specific settings
l
Store a backup of the control unit’s settings
l
Copy the specific settings, and then upload them to another control unit in another room
g To download a configuration file
1. Start SMART Audio configuration software, and then click Download Configuration File
from CU on the Setup tab.
The file downloads from the control unit to your computer.
2. Edit the file, if you desire.
3. Select File > Save to save the configuration file to your computer.
C H A P T E R 5
Customizing your settings
32