Sony 370PL - Manual (Page 94)

94
Chapter 4 Viewfinder Screen Indications and Menus
Chapter 4 Viewfinder Screen Indications and Menus
Viewfinder Basic Menu
Basic menu page 5
This menu is displayed when CAM is selected on the
basic menu page 4 and an external sync signal is input
to the GEN LOCK IN connector.
a) This applies when using an external sync signal to
synchronize operation of several camcorders (see page 50).
Note
This page is not displayed when a CCU (camera
control unit) is connected.
Basic menu page 6
Item Settings
SC PHASE
Sub carrier phase adjustment for
when the camcorder is genlocked.
a)
000 to 999
H PHASE
Horizontal phase adjustment for
when the camcorder is genlocked.
a)
000 to 135 (normal value)
to 199
Item Settings
MARKER
Sets marker display ON/OFF. ON (normal value), OFF
Markers are displayed
when this setting is ON
and is not displayed
when it is OFF.
When the setting is ON,
go to advanced menu
page 4 to select the type
of marker
(see page
102).
DUR TIME
Sets the recording time.
Setting the recording time before
shooting helps you with making
scenes of equal duration.
When shooting with displaying
the recording time of the current
cut in the viewfinder (with the
REC TIME switch set to DUR),
the recording time indication
flashes to remind you that the
recording time has passed. 00:00 to 59:59 (minute :
second)
See “Setting the
recording time in
seconds”.
Setting the recording time in seconds
Move the cursor to DUR TIME, then press the MENU
dial.
A value of seconds appears.
If you turn the MENU dial when “59” is displayed, the
number under “MM” increased by one.