beautypg.com

Connecting a camera control unit, Connections – Sony 370PL User Manual

Page 52

background image

52

Chapter 2 Fitting and Connections

Chapter 2 Fitting and Connections

Connecting a Camera Control Unit

You can connect CCU-M5A/M5AP Camera Control
Unit (CCU) to the VTR/CCU connector of this
camcorder.

Note the following when connecting a CCU.
• The only video signal formats that can be transmitted

from this camcorder to the CCU are VBS and R–Y/
B–Y/Y.

• A CCU cannot be used at the same time as a remote

control device connected to the REMOTE1 or
REMOTE2 connector of this camcorder.

• When the camcorder is gen-locked to a CCU

reference signal, and then gen-locked to another
external reference signal, the other external reference
signal overrides the CCU reference signal for
camcorder gen-lock.

• The REC/TALLY indicator on the front of the DXF-

801/801CE viewfinder lights only when a CALL
signal is received from the CCU. It does not light or
flash during VTR recording or on errors.

• The interface gain of microphone input is –20 dB.
• Three types of power supply are available for

powering the camcorder under CCU operation.
The camcorder uses power sources, if present, in the
order EXT DC IN >Battery Pack > CCU.
Before switching the camcorder power supply
between CCU and another power source, always turn
off the camcorder's Power switch.
(CCU or EX DC power is recommended for shooting
over extended periods.)

• Before using a CCU, set the camcorder’s EZ mode to

OFF (see page 17). (The advanced menu does not
appear unless it is set to OFF.)

• The color matrix switching function of the CCU-

M5A/M5AP does not work with this camcorder.

• When the OUTPUT/DL/DCC+ item on page 2 of the

advanced menu is set to DL, the knee adjustment
function of the CCU-M5A/M5AP does not work.

Connections

CCZ-A cable transmission distance when CCU
connected
The following table shows cable transmission lengths
when a CCU is connected to the DSR-370/370P/
570WS/570WSP.

a) The maximum transmission distance of gen-lock signals

and return video is 150 m.

For details, contact your Sony dealer or a Sony service
representative.

Connected
viewfinder

Maximum transmission distance

Power from CCU

Power not from CCU

DXF-801/801CE
(1.5-inch type)

300 m

a)

300 m

a)

DXF-51/51CE
(5-inch type)

300 m

a)

300 m

a)

This manual is related to the following products: