Sony 370PL - Manual (Page 86)

86
Chapter 4 Viewfinder Screen Indications and Menus
Chapter 4 Viewfinder Screen Indications and Menus
Displaying the normal indications and
switching to the basic menu
To display the normal indications, move the POWER
switch to the ON position.
To switch to and from the basic menu, use the MENU
switch or MENU dial.
“CHECK DIAG” appears before basic menu page 1
when the self diagnostic function has detected an
abnormality. (see page 97.)
Display by moving the
POWER switch to the
ON position.
Switch by pressing the
MENU switch down or
press and turn the
MENU dial downward.
Display by holding the
MENU switch up while
the normal indications
are present.
a) For the DSR-570WS/570WSP, when MENU MODE on page 9
of the advanced menu is set to 2, an aspect ratio (16:9/4:3)
switching menu appears before page 1 of the basic menu.
b) The menu configuration differs according to the camcorder’s
switch settings, the connected VCR, accessories (remote
control devices), and the type of input signal. A nine-page
configuration results when all of the basic menu pages are
displayed.
Basic menu
Status indications
Normal indications
Page 1 a)
Page 2
Page 9 b)
Viewfinder Screen Indications