Sony 370PL - Manual (Page 42)

42
Chapter 2 Fitting and Connections
Chapter 2 Fitting and Connections
Using Accessories
Fitting the 5-inch Electronic Viewfinder
You can fit the optional DXF-51/51CE (5-inch)/(DXF-
41/41CE (4-inch)) Electronic Viewfinder. To fit, the
following parts are required.
Required parts to fit
Name Part No.
Accessory Shoe Kit A-8274-968-B
Adaptor cable (8-pin y 20-pin) 1-783-665-11
(DXF-41/41CE only)
For details, contact your Sony dealer.
Fitting to a Tripod
First fit the VCT-U14 Tripod Adaptor to the tripod,
then mount the camcorder on the tripod adaptor. Removal
Note
After removing the camcorder, if the tripod adaptor pin
has not returned to its original position, hold down the
red button and move the lever in the direction of the
arrow to return the pin to its original position. It is not
possible to mount a camcorder with the pin left out.
VCT-U14 Tripod Adaptor
Slide the camcorder
forward along the slot, until
it clicks firmly into place. Tripod
Hold down the red button
and pull the lever in the
direction of the arrow.
Pin
How to fit
Remove the cover of the grip and attach the shoe and
stopper screw (accessory shoe kit).
VF Cable
Guide
Fixing ring
Shoe a)
Stopper
screw
a)
Adaptor cable (8-pin y 20-pin)
20-pin
8-pin
a) Supplied with the Accessory Shoe Kit