Samsung SNB-3000(P) User Manual

Page 61

English _1

●

p S
CR

To setup the record

Click - .

The Record setup window appears.
To complete the setting, click the

[Apply] button.

The settings are saved.

SD card : Enables you to verify data

saved on the SD memory card and

format the memory card itself. It

is possible to set to automatically delete movie clips recorded before a certain

period of time (e.g. 1 week, 1 month, or 1 year).

Options : Determine whether or not you wish to receive Email notification of

insufficient capacity warnings.

To set an alarm image

You can configure to send message via FTP/E-mail (SMTP) or to save recording into the

SD memory card.

Select a transfer method when an event occurs or the schedule transfer function is activated.

Select - .

The Alarm Image setup window

appears.

Transfer mode : You can select

alarm message notification method

among FTP/E-mail transfer and SD

Card recording.

FTP transfer : The image is sent to

the specified FTP address.

E-mail transfer : The image is sent to the specified email address.

SD Card Record : Saves images into the SD memory card.

If an SD memory card is not inserted, the corresponding button will be disabled.

In this case, insert the SD memory card into the slot and refresh to enable the button.

If the SD memory card is ejected while the button is checked, the camera automatically

restarts.

Transferred image naming setup : You can set the file name of an alarm image

to be sent when an alarm is triggered or during the scheduled transfer.

pre/post alarm image : You can set to save the pre or post alarm image.

Number of image : The frame rate per second can be one among 1, 2, 3, and 5.

Pre-alarm duration : The pre alarm duration can be one among 5 seconds, 10

seconds, 15 seconds, and 30 seconds. You can send a pre-alarm image of up

to 30 seconds before the alarm is triggered.

(The max time differs, depending on the frame rate)





