Samsung SNB-3000(P) - Manual (Page 18)

installation & connection
1_ installation & connection
CoNNeCTING WITh oTheR devICe
Connecting to the monitor
Connect the [vIdeo] port of the camera to the video input port of the monitor.
Network Connection
Connect the Network cable to the local network or to the Internet.
power Supply
Use the screwdriver to connect each line of the power cable to the corresponding port of
the camera.
Be careful not to reverse the polarity when you connect the power cable.
You can also use a router featuring PoE (Power over Ethernet) to supply power to the camera.
J 
SD CARD
AUDIO OUT
VIDEO
1 2 3 4 5
SD SYSTEM POWER
RESET
NETWORK
ACT LINK
GND
1,2 : ALARM IN 1,2
3 : GND
4,5 : ALARM OUT 1,2
AC 24V
DC 12V
AUDIO IN
Monitor
Network
Power