Samsung SNB-3000(P) - Manual (Page 24)

_ camera setup
camera setup
CAmeRA SeTUp
You can configure the general settings of the camera module.
For selecting and saving each menu item, refer to "how to use the menu key". (page 22)
CAmeRA Id
Provide the ID and position for a camera that displays on the screen.
Select - .
Use the four direction ($%_ +) buttons to
select a desired character.
In the lower input box of the screen, the
selected character will be entered.
You can enter up to 54 characters including alphabets,
numbers and special characters.
When done, continue to select
to specify the display position of the camera ID.
IRIS
You can set the iris to control the intensity of radiation incoming to the camera.
Select - .
Use the left/right (_ +) buttons to select either
or .
ALC : Controls the luminance automatically.
LENS : Select a lens to use.
LEVEL : Select the global brightness level.
BACKLIGHT : Select WDR or BLC.
WDR : Define the composition for weight
factor, the shutter speed in WDR level, and
select outdoor or indoor for white balance
setup.
BLC (Backlight compensation) : Configure the backlight compensation area by
defining the area size and location.
ELC : Controls the level electronically.
LEVEL : Select an overall brightness level.
BACKLIGHT : Set the area for the backlight compensation.
If you select for , you can select the area size and location.
If the iris is set to , fixing the iris is your priority when you adjust AE and the shutter speed.
1.
2.

3.
1.
2.

-
-
-
-
-

-
-
M 
CAMERA ID
A BCDEFGHIJKLMNOPQRSTUVWXYZO
123456789 : ?_+
*()/
SP►► ◄◄ SP LOCATION
- - - - - - - - - - - - - - - - - - - - - - - - -
- - - - - - - - - - - - - - - - - - - - - - - - -
ALC
LENS DC
LEVEL [ 00] ---- I ----
BACKLIGHT OFF