Samsung SNB-3000(P) - Manual (Page 56)

setup screen
_ setup screen
To check the log information
Select - .
The Log information list appears.
System log list : Shows the log
information about the system changes
along with time and IP address.
System started: When the camera
turns on
User login: When the user logs in to the camera
System reset: When the camera restarts
Network is up: When accessing the network
Network is down: When not accessing the network
Video param. changed: When the video related parameters are changed
System time changed: When the system time is changed
Network configuration change: When the network related configurations are changed
Alarm occurrence 1, 2: When an alarm is generated
Intelligent Video Analysis occurrence: When an intelligent video analysis event is generated.
FTP send error: When FTP transfer failed
SMTP send error: When sending e-mail message through SMTP server fails.
The maximum of 2000 logs can be recorded.
If the log number is over 2000, the log in the bottom of the log list will be replaced with a new log.
To update the software
Select - .
The Software update window appears.
how to update the software
From the software update window,
click [Browse…].
The Open dialog appears.
Select an updatable file and click
[open].
From the software update window,
click [Install].
The selected file will be unzipped with a
start of the update.
It may take a several minutes to complete the update.

-
-
-
-
-
-
-
-
-
-
-
-
M 
1.
2.
3.