Sony Ericsson Z750a - Manual (Page 24)

22 Calling
Voice control
By creating voice commands you can:
• Voice dial – call someone by saying
their name
• Activate voice dialing by saying
a “magic word”
• Answer and reject calls when you
use a handsfree
To record a voice command to be
used for voice dialing
1 From standby select Menu > Settings
> the General tab > Voice control
> Voice dialing > Activate .
2 Select Yes > New voice command
and select a contact. If the contact
has more than one number, select the
number to add the voice command to.
3 Record a voice command such as
“John mobile”.
4 Follow the instructions that appear.
Wait for the tone and say the command
to record. The voice command is played
back to you.
5 If the recording sounds OK, select Yes .
If not, select No and repeat steps 3 and 4 .
To rerecord a voice command
1 From standby select Menu > Settings
> the General tab > Voice control
> Voice dialing > Edit names .
2 Scroll to a command and select Options
> Replace voice .
3 Wait for the tone and say the command.
Voice dialing
You can call a contact by saying the
name.
To voice dial
1 From standby press and hold down
a volume key.
2 Wait for the tone and say a recorded
name, for example “John mobile”. The
name is played back to you and the
call is connected.
To make a call with a handsfree
• Press the handsfree key.
The magic word
You can record and use a voice
command as a magic word to activate
voice dialing without pressing any keys.
Your handsfree must be connected to
your phone when using the magic word.
Voice commands are saved in the phone
memory only. They cannot be used in
another phone.
You should choose a long, unusual word
or phrase that can easily be distinguished
from ordinary background speech.
Bluetooth handsfree does not support this
feature.
Z750a_UG_AT&T_P1C_AE.book Page 22 Wednesday, September 12, 2007 8:18 AM
PPreflighted by reflighted by Preflighted by
( ) ( ) ( )