Sanyo Xacti VPC-HD2 - Manual (Page 213)

199
English
SPECIFICATIONS
Shutter speed Still image shooting mode: 1/2 to 1/2,000 sec.
(Maximum approx. 4 seconds when scene select
function set to lamp Q)
(During flash: 1/30 to 1/2,000 sec.)
Sequential shots mode: 1/15 to 1/2,000 sec. (no
flash)
Video clip recording mode: 1/30 to 1/10,000 sec.
(1/15 sec. max.: when scene select function is set
to lamp mode Q)
Sensitivity Still image shooting mode (Standard output
sensitivity*):
Auto (ISO 50 to 400)/ISO 50, ISO 100, ISO 200,
ISO 400, ISO 800, and ISO 1600 (switchable from
Shooting Setting Screen)
* Sensitivity measured in compliance with the
ISO standard (ISO 12232:2006).
Video clip recording mode:
Auto (equivalent to ISO 200 to 1600)/equivalent to
ISO 200, ISO 400, ISO 800, ISO 1600, and ISO
3200 (switchable from Shooting Setting Screen)
* Maximum ISO sensitivity up to 3200 equivalent
when Scene Select function is set to Q
Minimum subject
illumination 18 lux (HD mode/normal mode, 30 fps, 1/30 sec in
AUTO mode)
7 lux (HD mode/normal mode, 30 fps; 1/15 sec in the
HIGH SENSITIVITY or lamp mode)
Image stabilizer Electronic (video clip recording mode only)
Monitor Amorphous silicon TFT color liquid crystal
(transmissive)
150,000 pixels (frame coverage: approx. 100%)
Flash working
range GN = 6.4
Approx. 35 cm (13.78 in.) to 2.5 m (8.20 ft.)
(Wide)
Approx. 1 m (3.28 ft.) to 2.5 m (8.20 ft.) (Tele)
Flash modes Auto-flash, forced flash, flash off, red-eye reduction