Sanyo Xacti VPC-HD2 - Manual (Page 104)

English
90
ISO SENSITIVITY
With the initial settings, the ISO sensitivity is automatically set according to
the brightness of the subject. However, the ISO sensitivity can be set to a
fixed setting.
1
Display the PAGE 2 Shooting Setting Screen (page 72).
2
Select the ISO sensitivity menu.
* The indicated ISO value when capturing still images is the standard
output sensitivity.
3
Select the desired icon from the ISO sensitivity menu, and press the
SET button.
h This completes the ISO sensitivity setting.
HINT
i By setting a higher ISO sensitivity, you can set faster shutter speeds and
capture images in darker locations, but noise in the captured images may
increase or the images may be irregular.
t: Sets the ISO sensitivity automatically (ISO 50 to 400 [video clip
recording mode: corresponds to ISO 200 to 1600]).
*
: Sets the sensitivity to ISO 50 (video clip recording mode:
corresponds to ISO 200).
u: Sets the sensitivity to ISO 100 (video clip recording mode:
corresponds to ISO 400).
v: Sets the sensitivity to ISO 200 (video clip recording mode:
corresponds to ISO 800).
w: Sets the sensitivity to ISO 400 (video clip recording mode:
corresponds to ISO 1600).
6: Sets the sensitivity to ISO 800 (video clip recording mode:
corresponds to ISO 3200).
-: Sets the sensitivity to ISO 1600 (video clip recording mode:
corresponds to ISO 3200).