Sanyo Xacti VPC-HD2 - Manual (Page 151)

137
English
NOISE-REDUCTION FUNCTION
Use this setting to minimize noise in still images and produce a clear image.
1
Display the Option Screen (page 128).
2
Select the noise-reduction icon ^,
and press the SET button.
h The Noise Reduction Screen
appears.
ON:
The noise-reduction function is
enabled.
OFF:
The noise-reduction function is
disabled.
3
Select the desired setting, and press
the SET button.
h This completes the noise-reduction
setting.
HINT
i The noise-reduction function operates when the shutter speed is slower
than 1/4 second.
i Compared to normal shooting, the image processing time after shooting is
slightly longer.
i If the noise reduction function is set to “ON” when the still image mode is
set to sequential shots P, the still image mode automatically becomes
w.
NOISE REDUCTION
ON
OFF
OK