SEH Computertechnik TPG60 - Manual (Page 73)

Firmware Update
TPG60 User Manual 73
Fig. 8: InterCon-NetTool - Firmware Update
Standard Firmware Update via FTP
You can update the standard firmware of your TPG60 via an FTP
connection.
Proceed as follows:
1. Change to the directory where the firmware file is located.
2. Open an FTP connection to the TPG60:
Syntax: ftp
Example: ftp 192.168.0.123
3. Enter an arbitrary user name.
4. Enter either the TPG60 password or press ENTER if no password
has been assigned.
5. Switch to binary mode:
bin
6. Transfer the firmware file to the TPG60:
Syntax: put binfile
Example: put hp93.bin binfile
7. Close the FTP connection:
quit