SEH Computertechnik TPG60 - Manual (Page 19)

Administration Methods
TPG60 User Manual 19
The meaning of the icons are described in the following:
*The button is active if a device was marked in the list.
Print Server List All connected devices are shown in a list in the right-hand section of
the main dialog of the InterCon-NetTool. This section is referred to
as the print server list.
You can configure the information displayed in the print server list
according to your needs. Devices that are not available in the
network, appear dimmed.
Icon Name Description
Properties This opens the ’Properties’ dialog.*
Change password This opens the ’Change password’ dialog.*
Installation This starts a Wizard. A wizard helps you to
configure certain parameters.
Restart This opens the ’Restart’ dialog.*
Default settings This opens the ’Load default settings’ dialog.*
Print status page This opens the ’Print status page’ dialog.*
Firmware Update This opens the ’Firmware Update’ dialog.*
Refresh This refreshes the print server list.
Find New This adds newly connected network devices to
the print server list.
Rebuild This creates a new print server list.