SEH Computertechnik TPG60 - Manual (Page 67)

Certificate Management
TPG60 User Manual 67
When the CA certificate has been received, it must be saved in the
TPG60; see: ’How to Save CA Certificates in the TPG60?’
Ö
67.
Creating a Certificate Request via the InterCon-NetTool
Proceed as follows:
1. Start the InterCon-NetTool.
2. Mark the TPG60 in the print server list.
3. Select Actions – Certificate – Server certificate from the menu
bar. The Certificate dialog appears.
4. Tick Create certificate request.
5. Click Next.
6. Enter the relevant parameters, see: table 6
Ö
65.
7. Click Next. The parameters are listed.
8. Confirm by clicking Next. The creation of the certificate request
is in progress. This may take a few minutes.
9. Copy (Strg+c) the text between 'Begin Certificate Request' and
'End Certificate Request' and save (Strg+v) it into a text file.
10. Send the text file as certificate request to a certification
authority.
When the CA certificate has been received, it must be saved in the
TPG60; see: ’How to Save CA Certificates in the TPG60?’
Ö
67.
8.3 How to Save CA Certificates in the TPG60?
The root certificate must be in base 64 format.
What do you want
to do?
†
’Saving CA Certificates via the TPG Homepage’
Ö
68
†
’Saving CA Certificates via the InterCon-NetTool’
Ц
68