SEH Computertechnik TPG60 - Manual (Page 17)

Administration Methods
TPG60 User Manual 17
2.2 Administration via the InterCon-NetTool
The software InterCon-NetTool has been developed by SEH
Computertechnik GmbH for the administration of SEH network
devices within a predefined network.
You can configure all features of the TPG60 via the
InterCon-NetTool. Detailed information can be found in the
corresponding chapters.
The InterCon-NetTool has been designed for use in Windows, Apple
Mac OS X, and Linux networks. If you use the InterCon-NetTool in
Apple Mac OS X or Linux networks, some functions will notbe
available.
Installtion In order to use the InterCon-NetTool, the program must be installed
on a computer with Windows, Linux, or MacOS operating system.
Different installation files are available, depending on the operating
system. You will find the InterCon-NetTool installation files on the
product CD and on the Internet at www.seh.de.
Proceed as follows:
1. Start the InterCon-NetTool installation file.
2. Select the desired language.
3. Follow the installation routine.
ª
The InterCon-NetTool is installed on the computer.
Start and Exit To start the program, double-click the InterCon-NetTool icon. The
icon is found on the desktop or the start menu (depending on the
operating system.)
To exit the program, select File – Exit from the menu bar.
Overview After the InterCon-NetTool has been started, you will see the main
dialog with the following elements. The dialog may vary, depending
on which elements you have chosen to be shown or hidden.