Samsung HW-D7000 - Manual (Page 81)

English
81
06
Other Information
Symptom Check/Remedy
Menu screen does not appear
even when the menu function is
selected. • Are you using a disc that does not contain menus?
Aspect ratio cannot be changed. • You can play 16:9 BD/DVDs in 16:9 Wide mode, 4:3 Letter Box mode, or 4:3
Pan - Scan mode, but 4:3 BD/DVDs can be seen in 4:3 ratio only. Refer to the
Blu-ray Disc jacket and then select the appropriate function.
• The product is not working.
(Example: The power goes out
or a strange noise is heard.)
• The Product is not working
normally.
• Press and hold the romote control's STOP (
■ ) button for 5 seconds in
STANDBY mode.
- Using the RESET function will erase all stored settings.
Do not use this unless necessary.
• Only S.DIRECT, TONE, SLEEP and AUDIO ASSIGN buttons will operate, after
pressing the SHIFT button.
You have forgotten the rating
level password. • With no disc in the product, press and hold the product's STOP (
■ ) button for
longer than 5 seconds. INIT appears on the display and all settings will return
to the default values.
And then press the POWER button.
- Using the RESET function will erase all stored settings.
Do not use this unless necessary.
Can't receive radio broadcasts. • Is the antenna connected properly?
• If the antenna's input signal is weak, install an external FM antenna in an area
with good reception.
While listening to TV audio
through the Product, no sound is
heard. • If the OPEN/CLOSE ( ) button is pressed while listening to TV audio using the
TV functions, the BD/DVD functions are turned on and the TV audio is muted.
"Not Available" appears on
screen. • The features or action cannot be completed at this time because:
1. The BD/DVD’s software restricts it.
2. The BD/DVD’s software doesn’t support the feature (e.g., angles)
3. The feature is not available at the moment.
4. You’ve requested a title or chapter number or search time that is out of range.
If the HDMI output is set to a
resolution your TV cannot support
(for example, 1080p), you may not
see a picture on your TV. • Press and hold the STOP (
■ ) button on front panel for more than 5 seconds
with no disc inserted. All settings will revert to the factory settings.
No HDMI output. • Check the connection between the TV and the HDMI jack of the product.
• Check if your TV supports 480p/720p/1080i/1080p HDMI input resolution.
Abnormal HDMI output screen. • If random noise appears on the screen, it means that TV does not support
HDCP (High-bandwidth Digital Content Protection).
HW-D7000_XAA_0321.indd 81 HW-D7000_XAA_0321.indd 81 2011-03-21 2:02:39 2011-03-21 2:02:39