Samsung HW-D7000 - Manual (Page 51)

English
51
03
Setup
System
Initial Settings
By using the Initial Settings function, you can set
the language, Network Settings, etc.
For more information about the Initial Settings
function, refer to the Initial Settings section of this
user manual. (See page 34)
Anynet+ (HDMI-CEC)
Anynet+ is a convenient function that offers linked
operations with other Samsung products that
have the Anynet+ feature.
To operate this function, connect this product to
a Samsung TV with an HDMI cable.
With Anynet+ on, you can operate this product
using a Samsung TV remote control and start
disc playback simply by pressing the PLAY (►)
button on the TV’s remote control.
For more information, please see the TV user
manual.
Off : Anynet+ functions will not work.
On : Anynet+ functions will work.
NOTE
This function is not available if the HDMI cable
does not support CEC.
If your Samsung TV has an Anynet+ logo, then
it supports the Anynet+ function.
Depending on your TV, certain HDMI output
resolutions may not work.
Please refer to the user manual of your TV.
BD Data Management
Lets you manage the downloaded contents you
accessed through a Blu-ray Disc that supports
the BD-LIVE service and stored on memory
device.
You can check the device’s information including
the storage size, delete the BD data, or change
the memory device.
BD Data Management Screen Information :
Current Device : Display the selected device.
Total Size : Total memory size of the device.
•
•
✎



•
•
Available Size : Available memory in the
device.
Delete BD Data : Delete all BD data in the
storage.
Select Device : Change location of desired
memory to store BD data.
NOTE
In the external memory mode, disc playback
may be stopped if you disconnect the USB
device in the middle of playback.
Only those USB devices formatted in the FAT
fi le system (DOS 8.3 volume label) are
supported. We recommend you use USB
devices that support USB 2.0 protocol with 4
MB/sec or faster read/write speed.
The Resume Play function may not work after
you format the storage device.
The total memory available to BD Data
Management may differ, depending on the
conditions.
Input Selection
Set the default port of DIGITAL AUDIO IN for
each sources.
SAT : Select the desired input port for SAT
source.
GAME : Select the desired input port for GAME
source.
CD : Select the desired input port for CD
source.
Time Zone
You can specify the time zone that is applicable
to your area.
Settings
Display
Audio
Network
System
Language
Security
General
Support
Time Zone
< Change " Save ' Return
GMT + 00:00
London, Lisbon, Casablanca
•
•
•
✎




•
•
•
HW-D7000_XAA_0321.indd 51 HW-D7000_XAA_0321.indd 51 2011-03-21 2:02:04 2011-03-21 2:02:04