Samsung HW-D7000 - Manual (Page 64)

64
English
Basic Functions
The models below support audio sync
settings. Press iPod SYNC on the remote
control to change audio delay.
Supported Models : classic/3G nano/4G
nano/120GB classic/160GB Classic/5G nano
3D Sound
You can enjoy more natural and vivid
surround sound with enriched tones by
adjusting the depth of sound using the
level options.
3D SOUND OFF
 3D SOUND HIGH
 3D SOUND MEDIUM  3D SOUND LOW
NOTE
3D Sound is not available in FM mode.
Using the SHIFT button
ENTER, ▲▼◄►, S.DIRECT, TONE, SLEEP
and AUDIO ASSIGN button will operate, after
pressing the SHIFT button.
NOTE
ENTER , ▲▼, and ◄► buttons are active
even when you don't press the SHIFT button.
TONE
After pressing the SHIFT button, and
then Press the TONE button repeatedly
to select the option you want.
You can adjust the each value by
pressing the ▲▼ buttons.
BASS : -6dB ~ +6dB
TREBLE : -6dB ~ +6dB
TONE : ON, OFF
NOTE
The Tone Control function can be applied to
all channels except for the subwoofer.
If it is set to Tone Off, the Tone Control
function will be disabled.


✎

✎

•
•
•
✎


Set the 7.1CH Connection settings to
"Surround Back". (For further details, refer to
page 41.)
Press the PL II button of the remote
control until the desired setting is
displayed. Once selected with the desired
mode, sound will be heard through the
surround speakers.
MOVIE
Adds realism to the movie
soundtrack.
MUSIC
When listening to music, you can
experience sound effects as if you
are listening to the actual
performance.
GAME You can hear like game sound.
MATRIX
You will hear multi channel
surround sound.
PL
You can listen to a 2CH sound
source in 5.1CH surround sound
with all speakers active.
- A specifi c speaker(s) may not be
output depending on the input
signal.
PL OFF PL mode will be off.
iPod SYNC
If you insert your iPod player into the
iPod Dock that has already been
connected to the system, you can play
the video fi les in your iPod player
through the connected TV.
If the video signal does not synchronize properly
with the audio signal, press iPod SYNC on the
remote control to correct the synchronization.
NOTE
Before you can play the video fi les in the iPod
player, you must connect the Audio/Video
terminals of the TV to the home theater using the
Composite (A/V) cable.
1.
2.
✎

B
TONE
9
HW-D7000_XAA_0321.indd 64 HW-D7000_XAA_0321.indd 64 2011-03-21 2:02:20 2011-03-21 2:02:20