Samsung HW-D7000 - Manual (Page 67)

English
67
04
Basic Functions
Listening to Radio
Using buttons on the Remote Control
Press the INPUT SELECT on the remote control
to select FM.
Tune in to the desired station.
Preset Tuning 1 : You must fi rst add a desired
frequency as a preset. Press the STOP ()
button to select PRESET and then press the
TUNING/CH (
) button to select the preset
station.
Manual Tuning : Press the STOP () button to
select MANUAL and then press the TUNING/
CH (
) button to tune in to a lower or higher
frequency.
Automatic Tuning : Press the STOP () button
to select MANUAL and then press and hold the
TUNING/CH (
) button to automatically
search the band.
Presetting Stations
Example : Presetting FM 89.10 into memory
Press the INPUT SELECT on the remote control
to select FM.
Press the TUNING/CH ( ) button to select
<89.10>.
Press the TUNER MEMORY button.
NUMBER fl ashes on the display.
Press the TUNER MEMORY button
again.
Press the TUNER MEMORY button
before NUMBER disappears from the display.
NUMBER disappears from the display and the
station is stored in memory.
To preset another station, repeat steps 2 to 4.
To tune in to a preset station, press the
TUNING/CH (
) button to select a channel.
Setting Mono/Stereo
Press the MO/ST button.
Each time the button is pressed, the
sound switches between STEREO and
MONO.
In a poor reception area, select MONO for a
clear, interference-free broadcast.
1.
2.
•
•
•
1.
2.
3.
•
4.
•
•
5.
•
•
•
C
TUNER
MEMORY
Using buttons on the Main Unit
Using the INPUT SELECT dial on the front panel
to select FM.
Tune in to the desired station.
Preset Tuning 1 : You must fi rst add a desired
frequency as a preset. Press the STOP () or
TURNING MODE
button to select PRESET
and then press the SELECT ( ) button to
select the preset station.
Manual Tuning : Press the STOP () or
TURNING MODE button to select MANUAL
and then press the SELECT (
) button to
tune in to a lower or higher frequency.
Automatic Tuning : Press the STOP () or
TURNING MODE button to select MANUAL
and then press and hold the SELECT (
)
button to automatically search the band.
Presetting Stations
Example : Presetting FM 89.10 into memory
Using the INPUT SELECT dial on the front panel
to select FM.
Press the SELECT (
) button to select
<89.10>.
Press the MEMORY button.
NUMBER fl ashes on the display.
Press the MEMORY button again.
Press the MEMORY button before NUMBER
disappears from the display.
NUMBER disappears from the display and the
station is stored in memory.
To preset another station, repeat steps 2 to 4.
To tune in to a preset station, press the
SELECT (
) button to select a channel.
1.
2.
•
•
•
1.
2.
3.
•
4.
•
•
5.
•
HW-D7000_XAA_0321.indd 67 HW-D7000_XAA_0321.indd 67 2011-03-21 2:02:26 2011-03-21 2:02:26