Sharp AR-650 - Manual (Page 68)

64
5. TRIMMING/MASKING (Cont.)
3
1
Procedure
Using the original scale and the front scale,
read the values defining the desired area
as follows:
. X1 • • Distance from the original scale to the
left edge of the specified area
. X2 • • Distance from the original scale to the
right edge of the specified area
. Y1 • • Distance from the front scale to the
lower edge of the specified area
. Y2 • • Distance from the front scale to the
upper edge of the specified area
Set the above values using the digital keys
and the SET key as described in the
following procedure.
Select the editing function in the Editing
menu.
. Press the EDIT key to enter the Editing menu,
and then press the EDITING key.
2 Press the TRIM or MASK key.
2