Sharp AR-650 - Manual (Page 54)

50
In bypass copying by specifying the copy size, you can select the following copying modes:
. Duplex copying . Document storage . Image shift . Sort copying
. Annotation . Edge erase . Page number` . Dual-page copying
13. BYPASS COPYING BY SPECIFYING THE COPY SIZE
1 Place sheets of copy paper on the sheet
bypass.
The following message appears:
Ready for bypass feeding
. Paper of size Ledger to Statement-R can be
used.
. Place the sheets on the bypass guide and
align the slides to the paper size.
. You can set up to 100 sheets of paper (17 to
22 lb).
. Thick sheets of paper (23 to 32 lb), OHP films,
sticker labels should be inserted one sheet
at a time.
. For setting Ledger, Legal or Letter-R sized
paper, pull out the paper holder.
2 Select the desired copy size.
. Press the desired COPY-SIZE key.
. If Letter-R paper is used, press the COPY-
SIZE key twice. The paper size in the upper
right corner of the display panel will change.
3 Select the desired, image shift mode, edge
erase mode, dual-page copying, sort
copying, annotation, page number,
document storage or duplex copying mode
as well as the exposure and the reproduction
ratio.