Sharp AR-650 - Manual (Page 126)

122
6. HOLE PUNCHING MODE
With the optional punching unit attached to the optional finisher (AR-FN8, AR-FN9), you can
have your copies punched with holes for binding.
• The thickness of paper should be in the range of 17 lb. to 42 lb. Index. Special paper such
as OHP film is excluded.
1
Place the originals.
. Place the originals face up on the original feed
tray.
When Using the Automatic Document Feeder
2 Select the puncher mode.
. Press the BASIC key to display the Basic
menu. Then press the NON-SORT NON-
STAPLE key.
. Press the HOLE PUNCH key.
. If the key for the desired funcion is not shown,
press the Next key to switch the screen.
Key in the copy quantity using the digital
keys.
. When group-copying from the original
feed tray, you cannot vary the number of
copies for each original.
3