Sharp AR-650 - Manual (Page 26)

22
2. USING THE REVERSING AUTOMATIC DOCUMENT FEEDER (Cont.)
5 Align the slides on the original feed tray
to the size of the original.
. Set the slides a little wider than the actual
original width.
Slides
6 Insert the original.
. Place the original face up and insert it in
straight along the slides.
. When the original starts being pulled in
automatically, let go of the original.
The original is automatically copied and then
exits onto the original exit area.
Note: When using the single-feed mode with
Sort/Group/Staple copying or with the
functions in the “Using the Editing
Functions”, press the FINISHED key after
all the originals have been set.