Sharp AR-650 - Manual (Page 178)

174
2. FINISHER SPECIFICATIONS (OPTIONAL)
Tray Loading Capacity
The tray loading capacity is determined by the loading height in each mode.
Units of mm
±
7 mm
* Values in parentheses ( ) = the equivalent number of sheets of paper.
Mode Same paper loaded Job offset loaded Staples loaded
(Non-sort) (Sort/Group)
Tray No. 1 2 1 2 1 2
ST-R 147 147 X X X X
(1000) (1000)
LT 147 147 147 147
(1000) (1000) (1000) (1000)
LD, LG, 74 74 74 74
LT-R, COMP (500) (500) (500) (500)
Whichever of 110 mm,
750 sheets or 500 copies
is reached first
Whichever of 74 mm,
500 sheets or 50 copies
is reached first
Whichever of 110 mm,
700 sheets or 500 copies
is reached first
Whichever of 74 mm,
500 sheets or 50 copies
is reached first
AR-FN8
Ledger to Statement-R
17 to 22 lb.
50 sheets (Letters)
30 sheets (Ledger, Legal, Letter-R, COMP)
From the copier
23.6” (W) x 24.2” (D) x 39.9” (H)
Approx. 70.6 lb.
No
AR-FN9
Ledger to Statement-R
17 to 22 lb.
50 sheets (Letters)
30 sheets (Ledger, Legal, Letter-R, COMP)
From the copier
23.6” (W) x 24.2” (D) x 39.9” (H)
Approx. 114.8 lb.
Yes
Model Name
Copy Paper Size
Thickness
Stapling Function
Power Requirements
Dimensions
Weight
Saddle Stitcher
Mode Mixed-size loaded Mixed-size loaded and staples loaded
Setting Non-sort Sort Group Stapled one position Stapled two positions
74 X X X X
(500)
74 74 74
(500) (500) (500)
Mixture of paper
with different
width
Mixture of
paper with the
same width
Whichever of 74 mm,
500 sheets or 50
copies is reached first
Whichever of 74 mm,
500 sheets or 50
copies is reached first
Mixed-size Loaded
AR-PN2B
Number of punch holes and hole diameter
2/3 holes switchable
(8.0 mm dia.) Available paper sizes
2 holes: LG, LT-R, COMP
3 holes: LD, LT
* Specifications and appearance are subject to change without notice in the interest of product
improvement.
Hole Puncher (Options for AR-FN8/AR-FN9)