Sharp AR-650 - Manual (Page 53)

49
HOW TO MAKE COPIES
3 Place sheets of copy paper on the sheet
bypass.
The following message appears:
Ready for bypass feeding
. Paper from size Ledger to Statement-R can
be used.
. Place the sheets on the bypass guide and
align the slides to the paper size.
. You can set up to 100 sheets of paper (17 to
22 lb).
. Thick sheets of paper (23 to 32 lb), OHP films,
sticker labels should be inserted one sheet
at a time.
. For setting Ledger, Legal or Letter-R sized
paper, pull out the paper holder.
4 Key in the desired copy quantity.
5 Press the START key.
. If the BYPASS MISFEED symbol flashes on
the graphic display, remove all the sheets
from the sheet bypass and replace them.