Sharp AR-650 User Manual

Page 55

Text mode
Original mode

HOW TO

MAKE

COPIES

Key in the desired copy quantity.

. After aligning the edges of the originals, set

them face up on the original feed tray and
align the slides to the edges of the originals.

Place the original(s) on the original feed

tray or on the glass.

Note: Remove any paper clips or staples from

originals before placing them on the
original feed tray.

. After lifting the automatic document feeder,

place the original on the glass face down with
the bottom toward you and the left side
centered against the original scale.

Press the START key.

Slides

Note: Remove copies made on special sheets

such as thick paper (23~35 lb.), OHP films
or sticker labels one by one. They should
not be allowed to stack up in the exit tray
or finisher (optional).