Siemens GIGASET A58H User Manual

Page 10

First steps

A58H / IM1 en / A31008-M2055-R101-2-4N19 / starting.fm / 01.08.2008

ion 4,

.10.

2007

On the handset:

§Menu§

Settings

Handset

Register Handset

(If you require further information on the illustration of these operating steps,

please see

Enter the system PIN of the base station (the default is 0000) and

press

§OK§

On the base station:

Within 60 sec. press and hold the registration/paging key on the base station

(approx. 3 sec.).

The following is displayed after successful automatic or manual handset

registration:

The handset is assigned the lowest unassigned internal number (1–4). If more

than one handset is registered to the base station, the internal handset number

appears on the display, e.g.

INT 2

. If the internal numbers 1–4 are already

assigned to other devices, the number 4 will be overwritten.
To charge the batteries, leave the handset in the base station/charging cradle.

Should you have any questions and problems

Handset is

registering

The registration screen is displayed.

Menu

the strength of the reception signal between

base station and handset:
– good to poor:

Ð i С Т

– no reception:

| flashes

battery charge status:
–

= e V U (flat to full)

–

= flashes: batteries almost flat

–

e V U flashes: charging procedure

Please note

Only place the handset in the base station or charging cradle that is

intended for it.