Smeg XXPTS725 - Manual (Page 4)

Instructions for the Installer
22
Fit the insulating gasket provided carefully around the outside edge of the hole made in
the top as shown below, pressing it down with your hands so that its entire surface fits
snugly. Follow the dimensions shown, depending on the model of hob to be installed,
bearing in mind that on both models the long front edge must be flush with the hole. Fix
the hob to the structure using the brackets A provided. Carefully trim off the excess
edge of the gasket B. The dimensions in the drawing below refer to the hole on the
inside edge of the gasket.
See right for the precise holes to be used when
securing the hob to the top correctly using the
brackets.