Sony RM-AV2100B - Manual (Page 38)

38
Programming a
Frequently Used Key
Operation for SYSTEM
CONTROL Buttons
In addition to their original System
Control functions (see page 23), SYSTEM
CONTROL 1, 2 or 3 buttons can be
programmed to “learn” any remote
control signal.
As they operate independently from
other buttons, SYSTEM CONTROL 1, 2
or 3 buttons can work as one-touch
buttons without any preceding operation
such as pressing a Component Select
button to select a component.
This is useful if you prefer having the
SYSTEM CONTROL button as a “one-
touch” button for a single operation
rather than executing a series of
commands.
Note
Some specific remote control signals may not
be learned. Refer to the operating instructions
supplied to the specific remote control as well.
Example: To copy the settings of
the CD button to the VCR3
button
1
While pressing COMMANDER
OFF, press VCR3.
The keys for that component (VCR3)
flash.
2
While pressing VCR3, press CD.
The keys for CD flash.
3
Press COMMANDER OFF.
Assigning Other Components to
the Component Select Buttons
(continued)