Sony DCR-IP5/IP7BT - Manual (Page 57)

57
Advanced Recording Operations
3–5
LUMI. – +
OK OFF
DIG
EFFT
DIG EFFT DIG EFFT
STILL
SLOW
SHTR
OLD
MOVIE
OFF OK
LUMI. FLASH TRAIL
1
FN
2
6
PAGE3
Using special effects – Digital effect
This bar appears when the STILL,
FLASH, LUMI., or TRAIL mode is
selected.
(1) In CAMERA mode, select FN, then press the center z on the control button.
The PAGE1 screen appears.
(2) Select PAGE3, then press the center z on the control button. The PAGE3
screen appears.
(3) Select DIG EFFT, then press the center z on the control button. The DIG EFFT
screen used for selecting the desired digital effect mode appears.
(4) Select the desired digital effect mode, then press the center z on the control
button. In STILL and LUMI. modes, the still image is stored in memory.
(5) Select –/+, then press the center z on the control button repeatedly to adjust
the effect. You can also adjust the effect by pressing b/B repeatedly after you
select –/+.
Items to be adjusted
STILL The rate of the still image you want to superimpose on the moving
picture
FLASH The interval of flash motion
LUMI. The color scheme of the area in the still image which is to be swapped
with a moving picture
TRAIL The vanishing time of the incidental image
SLOW SHTR Shutter speed. The larger the shutter speed number, the slower the
shutter speed.
OLD MOVIE No adjustment necessary
(6) Press DISPLAY to turn off the screen buttons.