Sony DCR-IP5/IP7BT - Manual (Page 106)

106
Changing the menu settings
Icon/item
TITLEERASE
TITLE DSPL
TAPE TITLE
ERASE ALL
q INFODSPL
q REMAIN
CLOCK SET
LTR SIZE
DEMO MODE
Mode
——
z ON
OFF
——
——
z ON
OFF
z AUTO
ON
——
z NORMAL
2
×
z ON
OFF
Meaning
To erase a superimposed title (p. 94).
To display a superimposed title.
To not display the title.
To label a cassette (p. 99).
To erase all the data in the Micro Cassette
Memory (p. 101).
To display the cassette information of the tape.
This is displayed for 5 seconds in the following
cases: (p. 98).
• When turning on the power with a cassette
inserted or inserting a cassette.
• When entering the VCR mode using the
POWER switch.
To not display the cassette information of the
tape.
To display the remaining tape bar:
• for about 8 seconds after your camcorder is
turned on or a cassette is inserted, and also
calculate the remaining amount of tape.
• for about 8 seconds after you select and
you press the center z on the control button or
DISPLAY is pressed to display the screen
indicators.
• During fast-forwarding or rewinding the tape.
To always display the remaining tape indicator.
To set the date or time (p. 23).
To display the selected menu item in normal
size.
To display the selected menu item at twice the
normal size.
To make the demonstration appear.
To cancel the demonstration mode.
POWER
switch
CAMERA
VCR
VCR
CAMERA
VCR
CAMERA
VCR
CAMERA
VCR
CAMERA
VCR
CAMERA
MEMORY
CAMERA
MEMORY
VCR
CAMERA
Notes on DEMO MODE
• You cannot select DEMO MODE when a cassette is inserted in your camcorder.
• DEMO MODE is set to STBY (Standby) as the default setting and the demonstration
starts about 10 minutes after you have set the POWER switch to CAMERA without a
cassette inserted.
To cancel the demonstration, insert a cassette, set the POWER switch to a position
other than CAMERA, or set DEMO MODE to OFF. To set to STBY (Standby) again,
leave the DEMO MODE to ON in the menu settings, set the POWER switch to OFF
(CHG), and slide the POWER switch to CAMERA.