Sony DCR-IP5/IP7BT - Manual (Page 123)

123
“
Memory Stick
”
Operations
Recording an image from a tape as a still
image
– DCR-IP7BT only
Your camcorder can read moving picture data recorded on a tape and record it on a
“Memory Stick” as a still image.
Your camcorder can also take in moving picture data through the input jack and record
it as a still image on a “Memory Stick.”
Before operation
•Insert a recorded tape into your camcorder.
•Insert a “Memory Stick” into your camcorder.
(1) Set the POWER switch to VCR.
(2) Select
, then press the center z on the control button. The picture recorded
on the tape is played back.
(3) Keep pressing PHOTO lightly until the picture from the tape freezes.
“CAPTURE” appears on the screen. Recording does not start yet.
(4) Press PHOTO deeper. The image displayed on the screen will be recorded on
the “Memory Stick.” Recording is complete when the bar scroll indicator
disappears.
When the access lamp is lit or flashing
Do not shake or strike the camcorder. Also, do not turn the power off , eject the
“Memory Stick” or remove the battery pack. Otherwise, the image data may be
corrupted.
If “ ” appears on the screen
The inserted “Memory Stick” is incompatible with your camcorder because its format
does not conform with that used by your camcorder. Check the format of the “Memory
Stick.”
2
3 4
1 / 40
CAPTURE
FN FN
F I N E F I N E
PHOTO PHOTO
1
MEMORY/
NETWORK
VCR
CAMERA
(CHG)
POWER
OFF
ON
MODE