Step 1 preparing the power supply – Sony DCR-IP5/IP7BT User Manual
Page 20
20
While the battery pack is being charged, the CHG lamp flashes in the following
cases:
– The battery pack is not installed correctly.
– Something is wrong with the battery pack.
When you use the AC power adaptor
Place the AC power adaptor near the wall outlet. If any trouble occurs with this unit,
disconnect the plug from the wall outlet as soon as possible to cut off the power.
Charging time
Battery pack
Full charge
NP-FF50 (supplied)
120
NP-FF70
150
The charging time may increase if the battery’s temperature is extremely high or low
because of the ambient temperature.
Approximate number of minutes at 25°C (77°F) needed to charge an empty battery pack
Recording time
Recording with
Recording with
Battery pack
the viewfinder
the LCD screen
Backlighting on
Backlighting off
Continuous* Typical**
Continuous* Typical** Continuous* Typical**
NP-FF50
80
45
65
35
80
45
(supplied)
NP-FF70
170
100
140
80
170
100
Approximate number of minutes of recording time when you use a fully charged
battery
* Approximate continuous recording time at 25°C (77°F). The battery life will be
shorter if you use your camcorder in a cold environment.
** Approximate number of minutes for recording while you repeat recording start/
stop, zooming and turning the power on/off. The actual battery life may be shorter.
Playing time
Battery pack
Playing time
Playing time
on LCD screen
with LCD closed
NP-FF50 (supplied)
65
80
NP-FF70
135
165
Approximate number of minutes of playing time when you use a fully charged battery
Approximate continuous playing time at 25°C (77°F). The battery life will be shorter if
you use your camcorder in a cold environment.
Step 1 Preparing the power supply