Sony DCR-IP5/IP7BT - Manual (Page 21)

21
Getting started
If the power runs out quickly even though sufficient remaining battery time is
indicated
Fully charge the battery pack so that the correct battery remaining time will be
indicated.
Recommended charging temperature
We recommend charging the battery pack in an ambient temperature of between 10 to
30°C (50 to 86°F).
What is ”InfoLITHIUM”?
The “InfoLITHIUM” is a lithium ion battery pack which can exchange data such as
battery consumption with compatible electronic equipment. This unit is compatible
with the “InfoLITHIUM” battery pack (F series). Your camcorder operates only with the
“InfoLITHIUM” battery. “InfoLITHIUM” F series battery packs have the
mark.
“InfoLITHIUM” is a trademark of Sony Corporation.
Connecting to a wall outlet
When you intend to use your camcorder for a long time, we recommend that you
power it from a wall outlet using the AC power adaptor.
(1) Open the jack cover and connect the AC power adaptor supplied with your
camcorder to the DC IN jack on your camcorder with the plug’s v mark facing
the lens side.
(2) Connect the power cord to the AC power adaptor.
(3) Connect the power cord to a wall outlet.
PRECAUTION
The set is not disconnected from the AC power source (house current) as long as it is
connected to a wall outlet, even if the set itself has been turned off.
Step 1 Preparing the power supply
2,3 1