Samsung SINGLE LINE TELEPHONE - Manual (Page 21)

13
PAGING AND MESSAGING
MAKING AN INTERNAL PAGE
To make an announcement through keyset speakers:
1. Lift the handset.
2. Dial
55.
3. Dial the page zone number 1, 2, 3 or 4 (if using a DCS 408/408i system, dial 1 or
2 only)—OR—dial 0 to page all internal zones.
4. After the brief attention tone, make your announcement.
MAKING AN EXTERNAL PAGE
To make an announcement through external paging speakers:
1. Lift the handset.
2. Dial
55.
3. Dial the page zone number 5, 6, 7 or 8—OR—dial 9 to page all external zones.
4. After the brief attention tone, make your announcement.
NOTE: You cannot make an external page on a DCS 408 system. On a DCS 408i or DCS 816 sys-
tem, there is only one external page zone to select (zone 5).
ALL PAGE
To page all keysets and the external speakers at the same time:
1. Lift the handset and dial 55 plus *.
2. After the brief attention tone, make your announcement.
MEET ME PAGE/ANSWER
1. Make a page by dialling 54 plus any zone number and instruct the paged person
to dial 56.
2. After completing the page, press Recall and remain off-hook until the paged per-
son dials 56 from any phone. The paged person will be automatically connected
with you.