Sun Microsystems PCI - Manual (Page 33)

11
C H A P T E R
3
Configuring IP Over InfiniBand
This chapter contains the following sections:
■ “IPoIB Configuration” on page 11
■ “Managing IB Devices for IPoIB” on page 13
IPoIB Configuration
IP Over InfiniBand (IPoIB) is automatically configured when the system is booted.
The following procedure can be used when making changes to your configuration.
See System Administration Guide: Basic Administration (817-1985) for Solaris setup
information.
▼ Configuring IPoIB
1. Confirm that the IB-HCA ports are up.
To do this, type the command:
The output shows recently printed diagnostic messages that have the string
“tavor” in the message. Included in the output is a message that tells whether the
port is up or down.
# dmesg | grep tavor