5 settings for applications, 1 dial-up network settings, 2 fax settings – Siemens 7 User Manual

Page 25: Settings for applications, Dial-up network settings, Fax settings, 5settings for applications

Text mode
Original mode

Multiplexer Driver Developer’s Guide

5 Settings for Applications

Mux_Drv_DevGuide_v07

Page 25 of 36

2006-9-27

Confidential / Released

Settings for Applications

5.1

Dial-up Network Settings

The dial-up network settings must be configured according to the requirements of the network provider. The
WinMux2k driver has no special requirements.

5.2

Fax Settings

There are no special settings for the fax service of the operating systems.

Note: If the fax service is enabled for receiving fax messages, the virtual port is opened all the time. In this case
the driver cannot be disabled or unloaded. To change port settings the PC must be rebooted.