Sun Microsystems Sun FastEthernet PCI Adapter 805-1759-10 - Manual (Page 28)

16 Sun FastEthernet PCI Adapter Installation and User’s Guide • July 1997
External Transceivers
Some external transceivers support multiple link capabilities, such as 100BASE-T4,
100BASE-TX, and 10BASE-T, but not auto-negotiation. In this case, the driver
attempts to bring-up the link in the highest priority capability in the following
descending order of priority:
■ 100BASE-T4
■ 100BASE-TX
■ 10BASE-T
To bring-up your external transceiver in a lower priority capability, you must
configure the driver parameters to force the link to the desired mode.
Refer to your external transceiver documentation or the Platform Notes: The hme Fast
Ethernet Device Driver document for more information on forcing the link mode.
When using an external transceiver with the Sun FastEthernet PCI Adapter,
your system may not report the speed at which the link is operating, either
10 or 100 Mbps.