Sony DVP-CX777ES User Manual

Page 95

Set
tings
and

Ad
ju

Set the following items in the

order that they are explained
below.

The default settings are underlined.

To return to the default setting

Select the item, then press CLEAR. Note that
only the “SIZE” setting does not return to the
default setting.

◆ SIZE

Selects the size of the speakers.
• FRONT

• CENTER

• REAR

* Rear speaker position
Correctly specify the location of the rear speakers to
enjoy the surround effect.
• Set to “SIDE,” if the location of the rear speakers

corresponds to section A below.

• Set to “REAR,” if the location of the rear speakers

corresponds to section B below.

This setting affects only “VIRTUAL REAR
SHIFT,” “VIRTUAL MULTI REAR,” and
“VIRTUAL MULTI DIMENSION” mode
(page 72).

• SUBWOOFER

Notes

• The cut off frequency for the subwoofer is fixed at

120 Hz.

• If your speakers are too small to reproduce low

bass frequencies, utilize a subwoofer for low
frequency sound. When you set the speaker
settings to “SMALL,” the bass redirection
circuitry will be activated and the bass
frequencies for the speakers are output from the
subwoofer.

• Even if there are fewer than 6 speakers connected,

the player distributes the audio signal components
to the front speakers.

◆ DISTANCE

Sets the distance from your listening position
to the speakers.
Set the distance to your front speakers in
“FRONT” first (A). Then adjust the values in
“CENTER” (center speaker B), “REAR”
(rear speaker C), and “SUBWOOFER” (D)
to reflect the actual distance to your center
speaker, rear speakers, and subwoofer.

LARGE

Normally select this position.

SMALL

Select this when the speaker
cannot reproduce adequate bass
frequencies.

LARGE

Normally select this position.

SMALL

Select this when the speaker
cannot reproduce adequate bass
frequencies.

NONE

Select this if you do not connect
a center speaker.

LARGE
(REAR/
SIDE)

Normally select this position.
Select according to the rear
speakers position*.

SMALL
(REAR/
SIDE)

Select this when the sound
distorts or the surround effects
are difficult to hear.
Select according to the rear
speaker position*.

NONE

Select this if you do not connect
rear speakers.

YES

Select this if you connect a
subwoofer to output the LFE
(low frequency effect) signals
from the subwoofer.

NONE

Select this if you do not connect
a subwoofer.

continued