Sony DVP-CX777ES - Manual (Page 91)

91
Set
tings
and
Ad
ju
st
m
e
nt
s
Custom Settings
(CUSTOM
SETUP)
Use this to make playback related
adjustments and other settings.
Select “CUSTOM SETUP” in the Setup
Display. To use the display, see “Using the
Setup Display” (page 87).
The default settings are underlined.
◆ AUTO POWER OFF
Switches the Auto Power Off setting on or
off.
◆ AUTO PLAY
Switches the Auto Play setting on or off. This
function is useful when the player is
connected to a timer (not supplied).
◆ DIMMER
Adjusts the lighting of the front panel display.
◆ PAUSE MODE (DVD VIDEO/DVD-RW
only)
Selects the picture in pause mode.
◆ PLAYBACK MEMORY
The player can store “SUBTITLE” and other
settings of each disc for up to 400 discs
(Playback Memory).
Set this function “ON” or “OFF.”
The following settings are stored in memory.
– ANGLE (page 74)*
– AUDIO (page 69)*
– VIDEO CONTROL (page 76)**
– SUBTITLE (page 75)*
* DVD VIDEO only
**DVD VIDEO/VIDEO CD only
Notes
• The player can store the settings of up to 400
discs. When you store the setting of disc number
401, the first disc setting is canceled.
• The Playback Memory function cannot be used
for DVD-RWs in VR mode.
◆ TRACK SELECTION (DVD VIDEO only)
Gives priority to the sound track which
contains the highest number of channels
when you play a DVD VIDEO on which
multiple audio formats (PCM, DTS, or Dolby
Digital format) are recorded.
OFF Switches this function off.
ON The player enters standby mode
when left in stop mode for more
than 30 minutes.
OFF Switches this function off.
ON Automatically starts playback
when the player is turned on.
BRIGHT Makes the lighting bright.
DARK Makes the lighting dark.
AUTO
DARK Makes the front panel display
dark if you do not operate the
player or remote for a short
while.
AUTO OFF Turns off the lighting of the
front panel display if you do not
operate the player or remote for
a short while.
OFF Turns off the lighting.
CUSTOM SETUP
AUTO POWER OFF:
AUTO PLAY:
DIMMER: OFF
OFF
BRIGHT
AUTO PAUSE MODE:
OFF TRACK SELECTION:
ON PLAYBACK MEMORY:
OFF CD DIRECT:
AUTO The picture, including subjects
that move dynamically, is
output with no jitter. Normally
select this position.
FRAME The picture, including subjects
that do not move dynamically,
is output in high resolution.
ON Stores the settings in memory
when you eject the disc.
OFF Does not store the settings in
memory.
OFF No priority given.
AUTO Priority given.
c continued