Sony DVP-CX777ES User Manual

Page 73

So
und Ad

Hints

• You can select “SURROUND” by pressing the

SURROUND button on the player.

• You can also select “SURROUND” from the

Control Menu (page 15).

Notes

• To enjoy the multichannel audio through the

5.1CH OUTPUT jacks, correctly set each speaker
position and distance (page 94).

• When the playing signal does not contain a signal

for the rear speakers, it may be difficult to hear the
surround effect.

• When you select one of the TVS modes, the

player does not output the sound of center
speaker.

• When you select one of the surround modes, turn

off the surround setting of the connected TV or
amplifier (receiver)

• Make sure that your listening position is between

and at an equal distance from your speakers, and
that the speakers are located in similar
surroundings.

• Not all discs will respond to the “TVS NIGHT”

function in the same way.

• If you use the DIGITAL OUT (OPTICAL or

COAXIAL) jack and set “DOLBY DIGITAL” to
“DOLBY DIGITAL” and “DTS” to “DTS” in
“AUDIO SETUP,” sound will come from your
speakers but it will not have the SURROUND
effect.

• If the player is set up to output the signal from the

DIGITAL OUT (OPTICAL or COAXIAL) jack,
the TVS effect will not be heard when you play a
CD.

• “TVS NIGHT” can only be used for Dolby digital

discs.

L : Front speaker (left)
R : Front speaker (right)
LS: Rear speaker (left)
RS: Rear speaker (right)

: Virtual speaker