Audio filter (except super audio cd), Downmix (dvd video/dvd-rw only), Digital out (except super audio cd) – Sony DVP-CX777ES User Manual

Page 93

Set
tings
and

Ad
ju

◆ AUDIO FILTER (except Super Audio CD)

Selects a digital filter to reduce noise above
22.05 kHz (Sampling frequency (Fs) of the
audio source is 44.1 kHz), 24 kHz (Fs is 48
kHz), or 48 kHz (Fs is above 96 kHz).

Note

There may be little effect by changing the digital
filter depending on the disc or playback
environment.

◆ DOWNMIX (DVD VIDEO/DVD-RW only)

Switches the method for mixing down to 2
channels when you play a DVD which has
rear sound elements (channels) or is recorded
in Dolby Digital format. For details on the
rear signal components, see “Displaying the
disc’s audio information” (page 69). This
function affects the output of the following
jacks:
– LINE OUT AUDIO L/R 1/2 jacks
– DIGITAL OUT (COAXIAL or OPTICAL)

jack when “DOLBY DIGITAL” is set to
“D-PCM” (page 93).

◆ DIGITAL OUT (except Super Audio CD)

Selects if audio signals are output via the
DIGITAL OUT (COAXIAL or OPTICAL)
jack.

Note

Super Audio CD audio signals are not output from
the digital jack.

To set the digital output signal

The following switches the method of
outputting audio signals when you connect a
component such as an amplifier (receiver) or
MD deck with a digital input jack.
For connection details, see page 22.
Select “DOLBY DIGITAL,” “DTS,” and
“48kHz/96kHz PCM” after setting
“DIGITAL OUT” to “ON.”

If you connect a component that does not
conform to the selected audio signal, a loud
noise (or no sound) will come out from the
speakers, damaging your ears or speakers.
• DOLBY DIGITAL (DVD VIDEO/DVD-

RW only)

Selects the type of Dolby Digital signal.

• DTS (DVD VIDEO only)
Selects the type of DTS signal.

SHARP

Provides a wide frequency
range and spatial feeling.

SLOW

Provides smooth and warm
sound.

DOLBY
SUR-
ROUND

Normally select this position.
Multi-channel audio signals are
output to two channels for
enjoying surround sounds.

NORMAL

Multi-channel audio signals are
downmixed to two channels for
use with your stereo.

Normally select this position. When
you select “ON,” see “To set the digital
output signal” for further settings.

OFF

The influence of the digital circuit
upon the analog circuit is minimal.

D-PCM

Select this when the player is
connected to an audio
component lacking a built-in
Dolby Digital decoder. You can
select whether the signals
conform to Dolby Surround
(Pro Logic) or not by making
adjustments to the
“DOWNMIX” item in
“AUDIO SETUP” (page 93).

DOLBY
DIGITAL

Select this when the player is
connected to an audio
component with a built-in
Dolby Digital decoder.

D-PCM

Select this when the player is
connected to an audio
component without a built-in
DTS decoder.

DTS

Select this when the player is
connected to an audio
component with a built-in DTS
decoder.

AUDIO SETUP

AUDIO ATT:
AUDIO DRC:

DIGITAL OUT:

DOLBY DIGITAL:

OFF

STANDARD

AUDIO FILTER:

SHARP

DOWNMIX:

DOLBY SURROUND

D-PCM

48kHz/96kHz PCM:

48kHz/16bit

DTS:

D-PCM

continued