Savin 4090 User Manual

Page 54

Copying

Changing the number of sets

You can change the number of copy sets during copying.

Note

❒ This function can only be used when the Sort function is operative.

AAAA

When “Copying” is displayed, press the

{{{{Stop}}}} key.

BBBB

Press [Change Quantity].

Note

❒ If you set one set of copy, you cannot change the number of sets.

CCCC

Enter the number of copy sets using the number keys, and then press the

{{{{#}}}} key.

Note

❒ The number of sets you can enter depends on when the {{{{Stop}}}} key is

pressed.

DDDD

Press [Continue].
Copying starts again.

When memory is full

If the amount of data of the scanned originals exceeds the capacity of memory,
scanning is interrupted.

Note

❒ The number of pages that can be stored in memory is about 2000 pages of A4

size originals. It depends on the type of originals or memory settings.

Reference

In Sort mode, you can complete scanning and copying by copying the
scanned pages stored in memory until it becomes full, and then scanning and
copying the remained originals. See p.139 “Memory Full Auto Scan Restart”.

AAAA

Press the

{{{{Start}}}} key.

All scanned pages are copied, and data stored in memory are cleared.

BBBB

Remove the copies, and then continue copying following the instructions
on the display.