Savin 4090 - Manual (Page 23)

Placing Originals
13
1
Placing Originals on the Exposure Glass
Reference
When you place originals on the exposure glass, you can specify the way cop-
ies are delivered. See p.139 “Eject Copy Face Up/Down in Glass”.
AAAA
Lift the exposure glass cover or ADF.
Important
❒ Do not lift the exposure glass cover or ADF forcefully. Otherwise, ADF
cover might open or be damaged.
Note
❒ Be sure to lift the exposure glass cover or ADF to an angle of more than 30°.
Otherwise, the size of the original might not be correctly detected.
BBBB
Place the original face down on the exposure glass. The original should be
aligned against the rear left corner.
1. Positioning mark
2. Left scale
Note
❒ Start with the first page to be copied.
CCCC
Lower the ADF.
ND1C01EE
1
2